The Kubota GR2010 mower blade part number found is K5576-34350. The blade set part number found is K5647-3434. The blade measurement captured is width 2.5 in (64 mm) and thickness 0.5 in (13 mm). The deck uses 3 blades. The captured deck size is 42 in deck.
Blade part #K5576-34350
Blade set part #K5647-3434
Blade sizewidth 2.5 in (64 mm) and thickness 0.5 in (13 mm)
Blade count3 blades
Deck size42 in deck
Kubota GR2010 Mower Blade Size and Part Numbers
Mower blade part number
K5576-34350
Mower blade set part number
K5647-3434
Blade width
2.5 in (64 mm)
Blade thickness
0.5 in (13 mm)
Number of blades
3 blades
Deck size
42 in deck
Blade type
high-lift, mulching, and bagging
Blade Size Comparison Chart
Blade width comparison
This model
2.5 in
Average
2.5 in
Low
2 in
High
3.5 in
Blade thickness comparison
This model
0.5 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Mower deck size comparison
This model
42 in
Average
38 in
Low
30 in
High
48 in
Kubota GR2010 Blade Notes
Blade note
The Kubota GR2010 blade listing captured here shows single blade part number K5576-34350, blade set part number K5647-3434, and width 2.5 in (64 mm) and thickness 0.5 in (13 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money
Deck note
For the Kubota GR2010, the captured deck information is deck size 42 in deck and blade count 3 blades. Match the blades to the fitted deck, not just the tractor model name
Blade type note
The Kubota GR2010 blade style captured here is high-lift, mulching, and bagging. Blade type affects airflow and clipping handling, not just cut width
Fitment note
The blunt rule with the Kubota GR2010: part number and center hole beat guesswork. A blade can be the right length and still be wrong
Kubota GR2010 Mower Blade FAQ
Should you buy Kubota GR2010 blades by length only?
No. The blade width found is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Should you buy one Kubota GR2010 blade or a full set?
The single blade number captured is K5576-34350, and the set number captured is K5647-3434. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Why does the Kubota GR2010 deck size matter before buying blades?
The captured deck setup is 42 in deck with 3 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Which blade type should you use on the Kubota GR2010?
The blade type captured is high-lift, mulching, and bagging. Use that against the captured fitment value 42 in deck. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
