The Kubota ZD326 mower blade part numbers found are 70000-73764 and 77700-01822. The blade set part number found is K5677-34340. The blade measurement captured is thickness 0.25 in (6 mm) and center hole 1 in (25 mm). The deck uses 3 blades.
Kubota ZD326 Mower Blade Size and Part Numbers
| Mower blade part number | 70000-73764 and 77700-01822 |
|---|---|
| Mower blade set part number | K5677-34340 |
| Blade thickness | 0.25 in (6 mm) |
| Blade center hole size | 1 in (25 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, and bagging |
Blade Size Comparison Chart
Blade thickness comparison
Kubota ZD326 Blade Notes
| Blade note | The Kubota ZD326 blade listing captured here shows single blade part numbers 70000-73764 and 77700-01822, blade set part number K5677-34340, and thickness 0.25 in (6 mm) and center hole 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Kubota ZD326, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Kubota ZD326 is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Before ordering Kubota ZD326 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
Kubota ZD326 Mower Blade FAQ
Why does the Kubota ZD326 blade center hole matter?
The captured center-hole detail is 1 in (25 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
What is the difference between the Kubota ZD326 blade number and blade set number?
The captured single blade number is 70000-73764 and 77700-01822, while the captured blade set number is K5677-34340. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the Kubota ZD326?
The blade type captured is high-lift, mulching, and bagging. Use that against the captured fitment value 70000-73764 and 77700-01822. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
