The Kubota GR2000 mower blade part number found is K5576-34350. The blade set part number found is K5576-34350. The blade measurement captured is thickness 0.5 in (13 mm). The deck uses 2 blades. The captured deck size is 48 in deck.
Blade part #K5576-34350
Blade set part #K5576-34350
Blade sizethickness 0.5 in (13 mm)
Blade count2 blades
Deck size48 in deck
Kubota GR2000 Mower Blade Size and Part Numbers
Mower blade part number
K5576-34350
Mower blade set part number
K5576-34350
Blade thickness
0.5 in (13 mm)
Number of blades
2 blades
Deck size
48 in deck
Blade type
high-lift, mulching, standard, and bagging
Blade Size Comparison Chart
Blade thickness comparison
This model
0.5 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Mower deck size comparison
This model
48 in
Average
48 in
Low
38 in
High
60 in
Kubota GR2000 Blade Notes
Blade note
The Kubota GR2000 blade listing captured here shows single blade part number K5576-34350, blade set part number K5576-34350, and thickness 0.5 in (13 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the Kubota GR2000, the captured deck information is deck size 48 in deck and blade count 2 blades. Deck size matters because the same model family can use different blade kits
Blade type note
For the Kubota GR2000, blade type is listed as high-lift, mulching, standard, and bagging. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
Blades are cheap until you buy the wrong set twice. On the Kubota GR2000, confirm part number, deck size and blade count before buying
Kubota GR2000 Mower Blade FAQ
Why does the Kubota GR2000 deck size matter before buying blades?
The captured deck setup is 48 in deck with 2 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Which blade type should you use on the Kubota GR2000?
The blade type captured is high-lift, mulching, standard, and bagging. Use that against the captured fitment value 48 in deck. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured Kubota GR2000 blade part number enough to buy from?
The captured blade part number is K5576-34350. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
