The Kubota GR2010 coolant capacity is listed as 1.66 gal (6.3 L). It also lists coolant type ethylene glycol-based coolant.
Coolant capacity1.66 gal (6.3 L)
Coolant typeethylene glycol-based coolant
Kubota GR2010 Coolant Capacity
Coolant capacity
1.59 gal (6 L)
Cooling system capacity
1.66 gal (6.3 L)
Coolant type
ethylene glycol-based coolant
Engine horsepower
20.5 hp (15.3 kW)
Engine displacement
0.6 L (38.1 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
1.66 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
21 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.6 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Kubota GR2010 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Kubota GR2010 is 1.66 gal (6.3 L). Buy enough coolant before opening the drain plug
Coolant type note
The captured coolant type for the Kubota GR2010 is ethylene glycol-based coolant. Do not mix unknown coolant types unless the label and manual say they are compatible
Engine context note
The Kubota GR2010 engine data captured here is engine horsepower 20.5 hp (15.3 kW) and displacement 0.6 L (38.1 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
For a coolant change on the Kubota GR2010, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Kubota GR2010 Coolant Capacity FAQ
What is the Kubota GR2010 coolant capacity?
The Kubota GR2010 coolant capacity is listed as 1.66 gal (6.3 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota GR2010?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota GR2010?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Kubota GR2010 is the coolant mix specified in the manual.
How often should I change coolant in the Kubota GR2010?
The captured coolant change interval for the Kubota GR2010 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota GR2010 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota GR2010, the supporting engine data is horsepower 20.5 hp (15.3 kW) and displacement 0.6 L (38.1 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
