The Kubota GR2020 mower blade part number found is K5576-34350. The blade set part number found is K5647-34340. The blade measurement captured is thickness 0.5 in (13 mm). The deck uses 2 blades.
Blade part #K5576-34350
Blade set part #K5647-34340
Blade sizethickness 0.5 in (13 mm)
Blade count2 blades
Kubota GR2020 Mower Blade Size and Part Numbers
Mower blade part number
K5576-34350
Mower blade set part number
K5647-34340
Blade thickness
0.5 in (13 mm)
Number of blades
2 blades
Blade type
high-lift, mulching, and bagging
Blade Size Comparison Chart
Blade thickness comparison
This model
0.5 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Kubota GR2020 Blade Notes
Blade note
The Kubota GR2020 blade listing captured here shows single blade part number K5576-34350, blade set part number K5647-34340, and thickness 0.5 in (13 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the Kubota GR2020, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the Kubota GR2020 is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
Before ordering Kubota GR2020 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
Kubota GR2020 Mower Blade FAQ
What is the difference between the Kubota GR2020 blade number and blade set number?
The captured single blade number is K5576-34350, while the captured blade set number is K5647-34340. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap Kubota GR2020 blade types?
The blade type captured is high-lift, mulching, and bagging. You can often choose a different style only if it fits the same deck and spindle setup. Use K5576-34350 as the fitment starting point
Is the captured Kubota GR2020 blade part number enough to buy from?
The captured blade part number is K5576-34350. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
