The Case IH Farmall DX55 specifications include engine power rated at 55 hp (41.0 kW), transmission options including synchronized shuttle or power shuttle and a listed weight of 4,860 lbs (2,204 kg).
Case IH Farmall DX55 key specifications
| Engine power | 55 hp (41.0 kW) |
|---|---|
| PTO power | 47 hp (35.0 kW, mech shuttle) |
| Displacement | 135.2 cu in (2.2 L) |
| Transmission | synchronized shuttle or power shuttle |
| Fuel capacity | 13.5 gal (51.1 L) |
| Weight | 4,860 lbs (2,204 kg) |
| Wheelbase | 74.8 inches (189 cm) |
Case IH Farmall DX55 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power55 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power47 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.2 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity13.5 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight4,860 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase74.8 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH Farmall DX55 power chart
Compare the available engine, PTO and drawbar power ratings.
Engine specifications
| Bore/Stroke | 3.307 × 3.937 inches (84 × 100 mm) |
|---|---|
| Rated RPM | 2,700 |
| Compression | 22.4:1 |
| Air cleaner | dual paper elements |
| Starter volts | 12 |
Transmission options
| Gears | 12 forward and reverse |
|---|
PTO and hitch
| PTO (tested) | 48.01 hp (35.8 kW) |
|---|---|
| Rear hitch category | Category I/II |
| Rear lift (at 24"/610mm) | 3,465 lbs (1,571 kg) |
| Rear PTO | independent |
| Rear PTO speed | 540 rpm, 1.375-inch shaft |
| PTO engine speed | 540 PTO rpm at 2,475 engine rpm |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Total flow | 17.12 gpm (64.8 L/min) |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Battery volts | 12 |
Attachments
| Backhoe type | CaseIH BHX190 Backhoe, CaseIH BHX1,102 Backhoe, or CaseIH BHX1,114 Backhoe |
|---|---|
| Digging depth | 90 inches (228 cm), 102 inches (259 cm), or 114 inches (289 cm) |
| Bucket force | 2,712 lbs (1,230 kg), 3,550 lbs (1,610 kg), or 4,400 lbs (1,995 kg) |
| Dipperstick force | 1,950 lbs (884 kg), 2,225 lbs (1,009 kg), or 2,800 lbs (1,270 kg) |
| Attachment weight | 146 lbs (66 kg) |
| Transport height | 95 inches (241 cm) |
| Reach from pivot | 149 inches (378 cm) |
| Loading height | 92 inches (233 cm) |
| Bucket Rotation | 180° |
| Swing Arc | 180° |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
