The Case IH 495 specifications include engine power rated at 53 hp (39.5 kW), transmission options including partially synchronized, partial power shift, synchronized shuttle, or creeper and a listed weight of 5,200 to 6,090 lbs.
Case IH 495 key specifications
| Engine power |
53 hp (39.5 kW) |
| PTO power |
42 hp (31.3 kW) |
| Displacement |
179 cu in (2.9 L) |
| Transmission |
partially synchronized, partial power shift, synchronized shuttle, or creeper |
| Fuel capacity |
20 gal (75.7 L) |
| Weight |
5,200 to 6,090 lbs |
| Wheelbase |
79.8 inches (202 cm) |
Case IH 495 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power53 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power42 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity20 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight6,090 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase79.8 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 495 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 495 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity75.7 L
Case IH 495 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
3.88 × 5.06 inches (99 × 129 mm) |
| Rated RPM |
2,200 |
| Oil capacity |
8.2 qt (7.8 L) |
| Coolant capacity |
12 qt (11.4 L) |
| Starter volts |
12 |
| Net engine power |
50 hp (37.3 kW) |
| Engine speed range |
700-2,400 |
Transmission options
| Gear options |
8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse |
| Clutch |
dry disc |
| Oil capacity |
36 qt (34.1 L) |
PTO and hitch
| Rear hitch category |
Category I/II |
| Rear lift |
2,340 lbs (1,061 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm |
Hydraulics
| Hydraulic capacity |
9 gal (34.1 L) |
| Hydraulic type |
open center |
| Valves |
1 |
| Pump flow |
15.6 gpm (59.0 L/min) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Battery volts |
12 |
Dimensions and weight
| Length |
136 inches (345 cm) |
| Width |
66 inches (167 cm, with at minimum tread) |
| ROPS height |
93.5 inches (237 cm) |
| 2WD front axle clearance |
22.1 inches (56 cm) |
| 4WD front axle clearance |
14 inches (35 cm) |
Tires and tread
| Front tire |
6.00-16 |
| Rear tire |
14.9-24 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.