The Case IH 695 specifications include engine power rated at 72 hp (53.7 kW), transmission options including partially synchronized, partial power shift, synchronized shuttle, or creeper and a listed weight of 5,720 to 7,585 lbs.
Case IH 695 key specifications
| Engine power |
72 hp (53.7 kW) |
| PTO power |
62 hp (46.2 kW) |
| Displacement |
238.8 cu in (3.9 L) |
| Transmission |
partially synchronized, partial power shift, synchronized shuttle, or creeper |
| Weight |
5,720 to 7,585 lbs |
| Wheelbase |
88.7 inches (225 cm) |
| Rear PTO |
independent |
Case IH 695 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power72 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power62 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity29.5 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight7,585 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase88.7 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 695 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power52.9 hp
Case IH 695 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity111.7 L
Case IH 695 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
3.875 × 5.06 inches (98 × 129 mm) |
| Rated RPM |
2,400 |
| Compression |
16:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
10.4 qt (9.8 L) |
| Coolant capacity |
14.5 qt (13.7 L) |
| Starter volts |
12 |
| Net engine power |
68 hp (50.7 kW) |
| Engine speed range |
650-2,705 |
Transmission options
| Gear options |
8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse |
| Clutch |
dry disc |
| Oil capacity |
36 qt (34.1 L) |
PTO and hitch
| Drawbar (tested) |
52.90 hp (39.4 kW) |
| PTO (tested) |
61.02 hp (45.5 kW) |
| Rear hitch category |
Category II |
| Rear lift |
3,614 lbs (1,639 kg) |
| Rear PTO speed |
540 or 1,000 rpm |
Hydraulics
| Hydraulic capacity |
9 gal (34.1 L) |
| Hydraulic type |
open center |
| Valves |
1 |
| Pump flow |
15.8 gpm (59.8 L/min) |
Capacities
| ROPS fuel capacity |
20 gal (75.7 L) |
| Cab fuel capacity |
29.5 gal (111.7 L) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Battery volts |
12 |
Dimensions and weight
| Length |
142 inches (360 cm) |
| Width |
75 inches (190 cm, width at minimum tread) |
| Ballasted weight |
8,845 lbs (4,012 kg) |
| ROPS height |
96.5 inches (245 cm) |
| Cab height |
100.4 inches (255 cm) |
| 2WD front axle clearance |
20.8 inches (52 cm) |
| 4WD front axle clearance |
14.5 inches (36 cm) |
| 4WD cab shipping weight |
6,785 lbs (3,077 kg) |
Tires and tread
| Front tire |
7.50-16 |
| Rear tire |
14.9-24 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
