The Case IH 1494 specifications include engine power rated at 85 hp (63.4 kW), transmission options including partially synchronized, four-speed power shift, or creeper and a listed weight of 7,380 to 8,180 lbs.
Case IH 1494 key specifications
| Engine power |
85 hp (63.4 kW) |
| PTO power |
75 hp (55.9 kW) |
| Displacement |
219 cu in (3.6 L) |
| Transmission |
partially synchronized, four-speed power shift, or creeper |
| Weight |
7,380 to 8,180 lbs |
| Wheelbase |
88.5 inches (224 cm) |
| Rear PTO |
independent |
Case IH 1494 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power85 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power75 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.6 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity36 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight8,180 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase88.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 1494 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 1494 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity136.3 L
Case IH 1494 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
3.937 × 4.50 inches (100 × 114 mm) |
| Rated RPM |
2,200 |
| Torque |
222 lb-ft (301.0 Nm) |
| Torque RPM |
1,600 |
| Compression |
16:1 |
| Fuel system |
direct injection |
| Pre-heating |
thermostart |
| Oil capacity |
7.8 qt (7.4 L) |
| Coolant capacity |
15 qt (14.2 L) |
| Starter volts |
12 |
| Net engine power |
84 hp (62.6 kW) |
Transmission options
| Gear options |
12 forward and 4 reverse or 15 forward and 5 reverse |
| Oil capacity |
45.6 qt (43.2 L) |
PTO and hitch
| Rear hitch category |
Category II |
| Hitch control |
top-link draft sensing |
| Rear lift (at ends) |
3,600 lbs (1,632 kg) |
| Rear lift (at 24"/610mm) |
3,210 lbs (1,456 kg) |
| Rear PTO speed |
540 or 1,000 rpm, 1.375-inch shaft |
| PTO engine speed |
540 PTO rpm at 2,050 engine rpm |
Hydraulics
| Hydraulic type |
open center |
| Hydraulic pressure |
2,475 psi (170.7 bar) |
| Valves |
1 to 3 |
| Pump flow |
15.3 gpm (57.9 L/min) |
| SCV flow |
6.6 gpm (25.0 L/min, split flow) |
| Steering flow |
7.7 gpm (29.1 L/min) |
| Steering pressure |
1,885 psi (130.0 bar) |
Capacities
| ROPS fuel capacity |
24 gal (90.8 L) |
| Cab fuel capacity |
36 gal (136.3 L) |
Mechanical specifications
| Final drives |
bull gear |
| Differential lock |
mechanical rear |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
45 |
| Battery CCA |
420 |
| Battery volts |
12 |
| Battery AH |
96 |
Dimensions and weight
| Length |
147.5 inches (374 cm) |
| Width |
75 inches (190 cm) |
| Maximum permitted weight |
11,500 lbs (5,216 kg) |
| Maximum drawbar load |
3,000 lbs (1,360 kg) |
| Maximum rear axle load |
10,500 lbs (4,762 kg) |
| Steering wheel height |
72 inches (182 cm) |
| Hood height |
63 inches (160 cm) |
| ROPS height |
105 inches (266 cm) |
| Cab height |
106 inches (269 cm) |
| Exhaust height |
104.5 inches (265 cm) |
Tires and tread
| Rear tread |
56 to 80 inches (142 to 203 cm) |
| 4WD Standard tires (ag) |
Front: 11L-15. Rear: 18.4-34 or Front: 13.6-24. Rear: 18.4-34 |
| 4WD Optional tires (ag) |
Front: 12.4-24. Rear: 13.6-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
