The Case IH Farmall 125A specifications include engine power rated at 125 hp (93.2 kW), transmission options including power shuttle or synchronized shuttle and a listed weight of 9,061 to 10,406 lbs.
Case IH Farmall 125A key specifications
Engine power
125 hp (93.2 kW)
PTO power
105 hp (78.3 kW)
Displacement
411 cu in (6.7 L)
Transmission
power shuttle or synchronized shuttle
Fuel capacity
62 gal (234.7 L)
Weight
9,061 to 10,406 lbs
Rear PTO
independent
Case IH Farmall 125A industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power125 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power105 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement6.7 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity62 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight10,406 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH Farmall 125A power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power125 hp
PTO power105 hp
Tested PTO power109 hp
Tested drawbar power94.3 hp
Case IH Farmall 125A capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity234.7 L
Hydraulic capacity62.1 L
Engine oil14 L
Engine specifications
Bore/Stroke
4.094 × 5.197 inches (104 × 132 mm)
Rated RPM
2,200
Compression
17.5:1
Fuel system
mechanical injection
Oil capacity
14.8 qt (14.0 L)
Starter
electric
Starter volts
12
Emissions
Tier III
Transmission options
Gear options
8 forward and reverse or 16 forward and 8 reverse
PTO and hitch
Drawbar (tested)
94.27 hp (70.3 kW)
PTO (tested)
108.95 hp (81.2 kW)
Rear hitch category
Category II
Rear lift (at 24"/610mm)
7,200 lbs (3,265 kg)
Rear PTO speed
540 or 1,000 rpm
Hydraulics
Hydraulic capacity
16.4 gal (62.1 L)
Hydraulic type
open center
Valves
2 to 4
Pump flow
22 gpm (83.3 L/min)
Total flow
31 gpm (117.3 L/min)
Steering flow
9 gpm (34.1 L/min)
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
120
Battery CCA
950
Battery volts
12
Dimensions and weight
Rear axle bar
3.1 × 98 inches (78 × 2,489 mm)
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
