The Case IH 395 specifications include engine power rated at 46 hp (34.3 kW), transmission options including partially synchronized, partial power shift, synchronized shuttle, or creeper and a listed weight of 4,869 to 5,940 lbs.
Case IH 395 key specifications
| Engine power |
46 hp (34.3 kW) |
| PTO power |
35 hp (26.1 kW) |
| Displacement |
155 cu in (2.5 L) |
| Transmission |
partially synchronized, partial power shift, synchronized shuttle, or creeper |
| Fuel capacity |
20 gal (75.7 L) |
| Weight |
4,869 to 5,940 lbs |
| Wheelbase |
79.8 inches (202 cm) |
Case IH 395 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power46 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power35 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity20 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight5,940 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase79.8 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 395 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 395 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity75.7 L
Case IH 395 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
3.87 × 4.37 inches (98 × 111 mm) |
| Rated RPM |
2,200 |
| Torque |
119 lb-ft (161.4 Nm) |
| Torque RPM |
1,650 |
| Compression |
16:1 |
| Air cleaner |
dry with safety element |
| Oil capacity |
8 qt (7.6 L) |
| Coolant capacity |
12 qt (11.4 L) |
| Starter volts |
12 |
| Net engine power |
43 hp (32.1 kW) |
| Engine speed range |
650-2,430 |
Transmission options
| Gear options |
8 forward and 4 reverse, 16 forward and 8 reverse, or 8 forward and reverse |
| Clutch |
dry disc |
| Oil capacity |
36 qt (34.1 L) |
PTO and hitch
| Rear hitch category |
Category I/II |
| Rear lift (at 24"/610mm) |
2,160 lbs (979 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm |
Hydraulics
| Hydraulic capacity |
9 gal (34.1 L) |
| Hydraulic type |
open center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
1 or 2 |
| Pump flow |
14.3 gpm (54.1 L/min) |
| Steering flow |
3 gpm (11.4 L/min) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
45 |
| Battery CCA |
650 |
| Battery volts |
12 |
Dimensions and weight
| Length |
136 inches (345 cm) |
| Width |
66 inches (167 cm, 2WD) |
| Ground clearance |
10 inches (25 cm, 4WD frame) |
| Shipping weight |
4,929 lbs (2,235 kg, utility) |
| Hood height |
55 inches (139 cm, 2WD) |
| ROPS height |
93.5 inches (237 cm, 2WD) |
Tires and tread
| Front tire |
6.00-16 (2WD) or 7.50-16 |
| Rear tire |
13.6-28 (2WD) or 14.9-24 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
