Case IH Farmall 130A Specifications

The Case IH Farmall 130A specifications include engine power rated at 130 hp (96.9 kW), transmission options including power shuttle or mechanical shuttle and a listed weight of 9,660 to 10,605 lbs.

Case IH Farmall 130A key specifications

Engine power 130 hp (96.9 kW)
PTO power 105 hp (78.3 kW)
Displacement 273.7 cu in (4.5 L)
Transmission power shuttle or mechanical shuttle
Fuel capacity 56.8 gal (215.0 L)
Weight 9,660 to 10,605 lbs

Case IH Farmall 130A industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power130 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power105 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity56.8 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight10,605 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average

Case IH Farmall 130A power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power130 hp
PTO power105 hp
Tested PTO power117.7 hp
Tested drawbar power94.2 hp

Case IH Farmall 130A capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity215 L
Engine oil10 L
DEF capacity29.9 L

Case IH Farmall 130A dimensions chart

Compare the main listed tractor dimensions using centimetres.

Width189 cm
Cab height279 cm
ROPS height297 cm

Power and performance

Original price $68,708 in 2015 (ROPS, 2WD)

Engine specifications

Bore/Stroke 4.094 × 5.197 inches (104 × 132 mm)
Oil capacity 10.6 qt (10.0 L)
Starter electric
Starter volts 12
Emissions Tier IV
Emission control selective catalytic reduction

Transmission options

Gear options 8 forward and reverse or 16 forward and 8 reverse

PTO and hitch

Drawbar (tested) 94.17 hp (70.2 kW)
PTO (tested) 117.69 hp (87.8 kW)
Rear hitch category Category II
Hitch control draft sensing
Rear lift (at 24"/610mm) 7,200 lbs (3,265 kg)

Hydraulics

Hydraulic type open center with closed-center load-sensing remotes
Valves 2 to 4
Pump flow 22 gpm (83.3 L/min)

Capacities

Exhaust fluid (DEF) 7.9 gal (29.9 L)

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 120
Battery volts 12

Dimensions and weight

Width 74.5 inches (189 cm, width at fenders)
Ballasted weight 12,700 lbs (5,760 kg)
ROPS height 117.3 inches (297 cm)
Cab height 110 inches (279 cm)
Rear axle bar 3.071 × 98 inches (78 × 2,489 mm)

Tires and tread

2WD Standard tires (ag) Front: 10.00-16. Rear: 18.4-34
4WD Standard tires (ag) Front: 14.9-24. Rear: 18.4-34

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.