Case IH 485XL Specifications

The Case IH 485XL specifications include engine power rated at 52 hp (38.8 kW), transmission options including synchromesh or two-speed power shift and a listed weight of 5,620 lbs (2,549 kg).

Case IH 485XL key specifications

Engine power 52 hp (38.8 kW)
PTO power 41 hp (30.6 kW)
Displacement 179 cu in (2.9 L)
Transmission synchromesh or two-speed power shift
Fuel capacity 29.6 gal (112.0 L)
Weight 5,620 lbs (2,549 kg)
Wheelbase 84.25 inches (213 cm)

Case IH 485XL industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power52 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power41 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity29.6 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight5,620 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase84.2 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH 485XL power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power52 hp
PTO power41 hp

Case IH 485XL capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity112 L
Coolant11.4 L

Case IH 485XL dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length361 cm
Wheelbase213 cm
Cab height251 cm

Engine specifications

Bore/Stroke 3.88 × 5.06 inches (99 × 129 mm)
Rated RPM 2,180
Torque 134.2 lb-ft (182.0 Nm)
Torque RPM 1,400
Compression 15:1
Coolant capacity 12 qt (11.4 L)
Starter electric
Starter volts 12
Engine speed range 815-2,180

Transmission options

Gear options 8 forward and 4 reverse or 16 forward and 8 reverse

PTO and hitch

Rear hitch category Category I/II
Hitch control Top link draft sensing.
Rear lift 3,700 lbs (1,678 kg)
Rear PTO independent
Rear PTO speed 540 rpm
PTO engine speed 540 PTO rpm at 1,936 engine rpm

Hydraulics

Hydraulic pressure 2,500 psi (172.4 bar)
Pump flow 12.4 gpm (46.9 L/min)
Steering flow 2.6 gpm (9.8 L/min)
Steering pressure 1,550 psi (106.9 bar)

Mechanical specifications

Clutch hydraulic wet disc
Steering hydrostatic power

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 45
Battery CCA 420
Battery volts 12
Battery AH 95

Dimensions and weight

Length 142.5 inches (361 cm)
Cab height 99.2 inches (251 cm)

Tires and tread

Standard tires (ag) Front: 7.50-16. Rear: 12.4-36

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.