The Kubota FT240 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,293 lb (1,040 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight2,293 lb (1,040 kg)
Kubota FT240 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,293 lb (1,040 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,293 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT240 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota FT240 rear hitch spec points to 1,200 lb (544 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota FT240, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota FT240, operating weight is 2,293 lb (1,040 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
The practical reason to check rear lift on the Kubota FT240 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota FT240 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota FT240?
Rear lift capacity for the Kubota FT240 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota FT240 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota FT240?
Yes. The Kubota FT240 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota FT240?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota FT240?
No. The Kubota FT240 may list 1,200 lb (544 kg) of rear lift, but the 2,293 lb (1,040 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
