The Kubota FT300 has a 3-point hitch lift capacity of 1,540 lb (699 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 3,000 lb (1,361 kg).
Best rear lift figure1,540 lb (699 kg)
Lift at 24 inches1,540 lb (699 kg)
Hitch categoryCategory 1
Operating weight3,000 lb (1,361 kg)
Kubota FT300 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
1,540 lb (699 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
3,000 lb (1,361 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,000 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT300 Hitch and Rear Lift Notes
24-inch lift note
The Kubota FT300’s 1,540 lb (699 kg) lift rating at 24 inches behind the link ends is the better real-world number for mounted implements than a bare hitch-end rating
Hitch category note
Hitch category on the Kubota FT300 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
The Kubota FT300’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota FT300 operating weight is listed as 3,000 lb (1,361 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
For the Kubota FT300, compare 1,540 lb (699 kg) with real implement weight. Common rear-implement checks include box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota FT300 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota FT300?
Rear lift capacity for the Kubota FT300 is shown as 1,540 lb (699 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota FT300 is listed at 1,540 lb (699 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota FT300?
Yes. The Kubota FT300 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota FT300?
Start with 1,540 lb (699 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota FT300?
Yes. The Kubota FT300 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 3,000 lb (1,361 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
