The Kubota FT220 has a 3-point hitch lift capacity of 2,200 lb (998 kg). It also lists hitch category Category 1, hydraulic pump flow 12.5 gpm (47.3 L/min), and operating weight 2,200 lb (998 kg).
Best rear lift figure2,200 lb (998 kg)
Hitch categoryCategory 1
Operating weight2,200 lb (998 kg)
Kubota FT220 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
12.5 gpm (47.3 L/min)
Operating weight
2,200 lb (998 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
12.5 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
2,200 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT220 Hitch and Rear Lift Notes
Rear lift capacity note
For implement matching, the Kubota FT220 should be judged from the 2,200 lb (998 kg) 3-point hitch lift capacity figure. That gives a better real-world read than horsepower alone
Hitch category note
For the Kubota FT220, Category 1 is the important compatibility spec. Lift capacity tells you what it can raise; category tells you what fits
Hitch control note
For the Kubota FT220, position control is listed as hitch-control context. Do not size implements from this field; use lift capacity and hitch category first
Hydraulic flow note
For hydraulic context, the Kubota FT220 is listed at 12.5 gpm (47.3 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota FT220’s captured operating weight is 2,200 lb (998 kg), which affects ballast, traction and stability
Rear implement matching
The Kubota FT220 hitch spec is useful because it helps judge whether attachments like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box are in the right size range
Kubota FT220 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota FT220?
Rear lift capacity for the Kubota FT220 is shown as 2,200 lb (998 kg) for 3-point hitch lift capacity. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is rear lift capacity always measured the same way?
No. For the Kubota FT220, check whether the figure is measured at the hitch ends or 24 inches behind the link ends. The behind-the-hitch number is usually more realistic.
Does hitch category matter on the Kubota FT220?
Yes. The Kubota FT220 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota FT220?
Start with 2,200 lb (998 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota FT220?
No. The Kubota FT220 may list 2,200 lb (998 kg) of rear lift, but the 2,200 lb (998 kg) operating weight and 12.5 gpm (47.3 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
