The Kubota FT240 coolant capacity is listed as 2.3 gal (8.7 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
Kubota FT240 Coolant Capacity
| Coolant capacity | 2.3 gal (8.7 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Engine displacement | 1.5 L (91.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine displacement comparison
Kubota FT240 Coolant and Engine Notes
| Coolant capacity note | The Kubota FT240 coolant spec points to 2.3 gal (8.7 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Coolant type note | The captured coolant type for the Kubota FT240 is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Engine context note | For the Kubota FT240, the supporting engine specs are displacement 1.5 L (91.5 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | For a coolant change on the Kubota FT240, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota FT240 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota FT240?
The Kubota FT240 cooling system capacity is shown as 2.3 gal (8.7 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota FT240?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota FT240?
Not for normal long-term use. The Kubota FT240 should use the coolant mix specified in the manual or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota FT240?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota FT240 is the service interval in the operator manual.
What engine specs affect Kubota FT240 coolant capacity?
The captured engine context is displacement 1.5 L (91.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
