The Case IH Farmall DX24E specifications include engine power rated at 24 hp (17.9 kW), a hydrostatic transmission and a listed weight of 1,323 lbs (600 kg).
Case IH Farmall DX24E key specifications
Engine power
24 hp (17.9 kW)
PTO power
18 hp (13.4 kW)
Displacement
61.3 cu in (1.0 L)
Transmission
hydrostatic
Fuel capacity
7.9 gal (29.9 L)
Weight
1,323 lbs (600 kg)
Wheelbase
55 inches (139 cm)
Case IH Farmall DX24E industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power24 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power18 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement1 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity7.9 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight1,323 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase55 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH Farmall DX24E power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power24 hp
PTO power18 hp
Engine specifications
Bore/Stroke
3.03 × 2.83 inches (77 × 72 mm)
Rated RPM
3,000
Compression
23:1
Starter volts
12
Engine speed range
1,300-3,225
Firing order
1-2-3
Transmission options
Gears
infinite forward and reverse (2-range)
PTO and hitch
Rear hitch category
Category I
Rear lift (at 24"/610mm)
700 lbs (317 kg)
Rear PTO
independent
Rear PTO speed
540 rpm, 1.375-inch shaft
Mid PTO
independent
Mid PTO speed
2,200 rpm
Hydraulics
Hydraulic type
open center
Pump flow
3.75 gpm (14.2 L/min)
Total flow
5.5 gpm (20.8 L/min)
Steering flow
1.85 gpm (7.0 L/min)
Electrical specifications
Electrical ground
negative
Battery volts
12
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
