The Case IH Farmall DX24 specifications include engine power rated at 24 hp (17.9 kW), transmission options including gear or hydrostatic and a listed weight of 1,502 to 1,600 lbs.
Case IH Farmall DX24 key specifications
| Engine power | 24 hp (17.9 kW) |
|---|---|
| Displacement | 69 cu in (1.1 L) |
| Transmission | gear or hydrostatic |
| Fuel capacity | 5.3 gal (20.1 L) |
| Weight | 1,502 to 1,600 lbs |
| Wheelbase | 57.5 inches (146 cm) |
| Rear PTO | 540 rpm, 1.375-inch shaft |
Case IH Farmall DX24 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power24 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
Displacement1.1 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity5.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight1,600 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase57.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Engine specifications
| Bore/Stroke | 3.03 × 3.19 inches (77 × 81 mm) |
|---|---|
| Starter | electric |
| Starter volts | 12 |
Transmission options
| Gear options | 9 forward and 3 reverse or infinite forward and reverse |
|---|
PTO and hitch
| Gear PTO (claimed) | 19.5 hp (14.5 kW) |
|---|---|
| Hydro PTO (claimed) | 18.5 hp (13.8 kW) |
| Rear hitch category | Category I |
| Rear lift (at 24"/610mm) | 1,265 lbs (573 kg) |
| Hydro Rear PTO | independent |
| Hydro Mid PTO | independent |
| Mid PTO speed | 2,000 rpm |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Valves | 2 (optional) |
| Pump flow | 4.9 gpm (18.5 L/min) |
| Total flow | 7.65 gpm (29.0 L/min) |
| Steering flow | 2.75 gpm (10.4 L/min) |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Battery volts | 12 |
Dimensions and weight
| Hydro Weight | 1,600 lbs (725 kg) |
|---|---|
| Gear Weight | 1,502 lbs (681 kg) |
Attachments
| Backhoe type | CaseIH BHX172 Backhoe |
|---|---|
| Digging depth | 72 inches (182 cm) |
| Bucket force | 2,875 lbs (1,304 kg) |
| Dipperstick force | 1,744 lbs (791 kg) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
