The John Deere 1010 is 120.1 in long and 74.9 in wide, with a 82.5 in wheelbase.
Length120.1 in (10 ft 0.1 in) / 3,050.5 mm
Width74.9 in (6 ft 2.9 in) / 1,902.5 mm
Wheelbase82.5 in (6 ft 10.5 in) / 2,095.5 mm
John Deere 1010 Dimensions
Overall length
120.1 in (10 ft 0.1 in) / 3,050.5 mm
Overall width
74.9 in (6 ft 2.9 in) / 1,902.5 mm
Wheelbase
82.5 in (6 ft 10.5 in) / 2,095.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
120.1 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
74.9 in
Average
70 in
Low
20 in
High
176 in
Wheelbase comparison
This model
82.5 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 1010 Extra Dimension Notes
Storage fit note
The John Deere 1010 storage check is fairly forgiving compared with bigger farm tractors. With length 120.1 in (10 ft 0.1 in) / 3,050.5 mm and width 74.9 in (6 ft 2.9 in) / 1,902.5 mm, the door opening is the main issue.
Fitment note
The John Deere 1010 listed measurements are length at 120.1 in (10 ft 0.1 in) / 3,050.5 mm and width at 74.9 in (6 ft 2.9 in) / 1,902.5 mm. If one number is close to your opening size, assume you need more clearance.
Wheelbase note
The John Deere 1010 wheelbase comes through as 82.5 in (6 ft 10.5 in) / 2,095.5 mm. It adds useful context to the length figure.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide and 15 ft deep, not the exact tractor dimensions.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
This size is still realistic for smaller sheds when the approach is straight and the attachments are removed.
The 82.5 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
A tight garage is a bad match when the machine is 120.1 in long, 74.9 in wide, and 82.5 in wheelbase. The John Deere 1010 needs a clear opening and bay closer to 8 ft wide and 15 ft deep for comfortable storage.
What size door should I check?
Do not size the door to exactly height not captured by 74.9 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow 15 ft depth for the 120.1 in tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this compact tractor, allow about 3 ft to 6 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The John Deere 1010’s 74.9 in width and 82.5 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
