Weight summary
The published Yanmar FX42D weight is 3,902 lb (1,769 kg). The primary figure used for comparisons is 3,902 lb (1,769 kg), listed as Weight.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Yanmar |
|---|---|
| Model | FX42D |
| Category | Farm tractor |
| Model years | 1983 – 1986 |
| Tractor type | Utility Tractor |
| Published weight variants | 1 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | — | 3,902 lb | 1,769 kg | 1.95 | — |
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Kubota L5240 (3902 lb)
- Kubota L5740 (3902 lb)
- Mahindra Yuvraj (3902 lb)
- J.I. Case 570 (3900 lb)
- Mahindra 3505 (3900 lb)
Closest comparable tractors
- John Deere 1010 (3923 lb)
- Massey Ferguson 230 (3840 lb)
- Mahindra 4110 (3969 lb, 41 hp)
- Case IH Farmall 40C (3869 lb, 40.2 hp)
- Massey Ferguson 1445 (3864 lb, 44.2 hp)
Yanmar FX42D weight FAQ
How much does a Yanmar FX42D weigh?
The Yanmar FX42D weighs 3,902 lb (1,769 kg) using the primary published weight figure.
Is the Yanmar FX42D heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 44th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 1,361 lb lighter than the peer-group average of 5,263 lb.
How wide is the Yanmar FX42D for transport?
The maximum published tractor width is 59 in (4.9 ft). That is 43 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Yanmar FX42D weight-to-horsepower ratio?
Using the page’s representative 3,902 lb weight and 42 hp power figure, the tractor carries about 92.9 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Yanmar FX42D weigh?
The representative published weight is about 1.95 US tons, while the full published range is 1.95 US tons. Loaded transport weight can be higher than the tractor specification.
