The John Deere 1010 takes 9.51 gal (36 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
John Deere 1010 Coolant Capacity Specs
| Coolant capacity | 9.51 gal (36 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 40/60 coolant and water mix |
| Engine horsepower | 40 hp |
| Engine displacement | 2.4 L (146.5 cu in) |
John Deere 1010 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 1010 Coolant Service Notes
| Coolant capacity note | The main coolant number for the John Deere 1010 is 9.51 gal (36 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down |
|---|---|
| Coolant service note | The John Deere 1010 cooling system should be refilled close to 9.51 gal (36 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix |
| Coolant type note | Coolant type matters on the John Deere 1010. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear |
| Antifreeze mix note | For the John Deere 1010, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water |
| Refill check | Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere 1010, but finish the job by checking the actual level marks |
| Engine context | The engine context for the John Deere 1010 is engine horsepower 40 hp and engine displacement 2.4 L (146.5 cu in). Use this for comparison only; the refill amount is the coolant capacity above |
John Deere 1010 Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 1010?
Use 9.51 gal (36 L) as the coolant-change amount for the John Deere 1010. The final level should still be checked at the radiator or overflow bottle
What coolant should I put in the John Deere 1010?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 1010. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 1010?
For the John Deere 1010, the coolant mix is listed as 40/60 coolant and water mix. Do not dilute the system with too much plain water
Should the John Deere 1010 coolant be checked hot or cold?
The 9.51 gal (36 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
What signs mean the John Deere 1010 coolant should be flushed?
For the John Deere 1010, use the 9.51 gal (36 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
