The Massey Ferguson 1010 dimensions found are: length is 85 inches | 215 cm, width is 41.9 inches | 106 cm, height is 46.2 inches | 117 cm, and wheelbase is 50.8 inches | 129 cm.
Massey Ferguson 1010 Dimensions
| Overall length | Gear: 85 inches | 215 cm | Hydro: 90.7 inches | 230 cm |
|---|---|
| Overall width | 41.9 inches | 106 cm |
| Overall height | Steering wheel: 46.2 inches | 117 cm |
| Wheelbase | Gear: 50.8 inches | 129 cm | Hydro: 55.1 inches | 139 cm |
| Ground clearance | Frame: 10.4 inches | 26 cm |
| Front tread | 2WD: 32.3 inches | 82 cm | 4WD: 34.8 inches | 88 cm |
| Rear tread | 2WD: 32.9 inches | 83 cm | 4WD: 38 inches | 96 cm |
Massey Ferguson 1010 Weight
| Shipping weight | 1420 lbs (2WD gear) | 644 kg |
|---|
Massey Ferguson 1010 Tire Size Notes
| Lawn/turf front | 21×8.00-10 | 20.5×8.00-10 |
|---|---|
| Lawn/turf rear | 29×12.00-15 |
Massey Ferguson 1010 Dimension Comparison Charts
Length comparison
Width comparison
Height comparison
Wheelbase comparison
Ground clearance comparison
Floor space footprint
Benchmarks use practical low, average and high dimension ranges for the compact tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 1010 Extra Dimension Notes
| Storage and fit note | Using the first listed dimension values, the Massey Ferguson 1010 is about 85 inches | 215 cm long, about 41.9 inches | 106 cm wide, and about 46.2 inches | 117 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor. |
|---|
Massey Ferguson 1010 Dimensions FAQ
Is the Massey Ferguson 1010 a long tractor?
The Massey Ferguson 1010 is on the shorter side at 85 in, which is below the 115 in benchmark average. That makes its listed length easier to fit than many tractors in the same compact tractor range.
Is the Massey Ferguson 1010 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 41.9 in, which is below the 56 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Massey Ferguson 1010 tall for a shed or garage?
The listed height is low for the category at 46.2 in, which is below the 86 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 1010 need?
The bare footprint is about 25 sq ft from a 7.1 ft length and 3.5 ft width. That is below the 45 sq ft benchmark for this category.
Does the Massey Ferguson 1010 have a short or long wheelbase?
The wheelbase is short for the category at 50.8 in, which is below the 68 in benchmark average. That points to a more compact chassis length.
Does the Massey Ferguson 1010 have good ground clearance?
The listed ground clearance is low for the category at 10.4 in, which is below the 12 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Will the Massey Ferguson 1010 fit easily in storage?
Yes. Based on length 85 in, width 41.9 in and height 46.2 in, the Massey Ferguson 1010 is compact in both listed length and width versus the category benchmarks. Height still needs to be checked separately.
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.


