The John Deere 7130 tractor hydraulic pump flow is 21 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow21 GPM
Implement flow17.5 GPM
Total hydraulic flow30 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity13.7 gal
John Deere 7130 Hydraulic Flow Details
Hydraulic pump flow
21 GPM
Implement hydraulic flow
17.5 GPM
Total hydraulic flow
30 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
13.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
17.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
30 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
13.7 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7130 Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 7130’s implement hydraulic flow matters more than total flow. The listed gap is about 12.5 GPM between implement flow and total flow.
Hydraulic pressure note
The John Deere 7130’s hydraulic pressure is listed at 2,500 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
For hydraulic implements, match the implement to the available hydraulic flow (17.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 7130: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 7130 is 13.7 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
