The Case IH 7130 tractor hydraulic capacity is 50.5 gal | 191.1 L, pump flow is 22 gpm | 83.3 lpm, and hydraulic pressure is 2600 psi | 179.3 bar.
Case IH 7130 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center pressure flow compensated (PFC) |
|---|---|
| Hydraulic capacity | 50.5 gal | 191.1 L |
| Hydraulic pressure | 2600 psi | 179.3 bar |
| Pump flow | 22 gpm | 83.3 lpm |
| Total hydraulic flow | 29 gpm | 109.8 lpm |
| Hydraulic valves | 2 to 4 |
Case IH 7130 Hitch, Remote & Lift Specs
| Rear hitch type | III/IIIN |
|---|---|
| Rear hitch control | electronic lower link |
| Rear lift at 24 inches | 9,300 lbs | 4218 kg |
Case IH 7130 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 0.4 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 2.3 minutes at rated pump flow |
| Total flow vs pump flow | 131.8% of listed pump flow |
| Rear lift per pump gpm | 422.7 lb per gpm |
| Rear lift per hydraulic gallon | 184.2 lb per gal |
| Estimated hydraulic horsepower | about 33.4 hydraulic hp from listed pressure and pump flow |
| Metric capacity vs pump flow | 191.1 L capacity with 22 gpm pump flow |
Case IH 7130 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 7130 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | hydraulic wet disc brakes |
Case IH 7130 Hydraulic Capacity FAQ
Is the Case IH 7130 hydraulic capacity big or small for its size?
The Case IH 7130 lists 50.5 gal | 191.1 L of hydraulic capacity, above the 42 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH 7130 hydraulics feel fast or slow?
The useful speed clue is 22 gpm | 83.3 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH 7130 hydraulic pressure tell you?
The pressure spec is 2600 psi | 179.3 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Case IH 7130?
On the Case IH 7130, 22 gpm | 83.3 lpm pump flow points to slower loader and cylinder movement, 2,600 psi pressure affects force more than speed, and 9,300 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 7130?
For implement matching, the useful checks are 22 gpm flow, 2,600 psi pressure, 9,300 lb listed lift, and 2 to 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 7130 rear lift capacity strong?
The listed lift figure is 9,300 lbs | 4218 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH 7130 hydraulic remotes enough?
The Case IH 7130 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH 7130 hydraulics handle long hydraulic jobs?
The useful heat clues are 50.5 gal of hydraulic capacity, 22 gpm flow, 2,600 psi pressure, and about 33.4 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the Case IH 7130 make on paper?
Using 2,600 psi and 22 gpm, the rough pressure-flow estimate is about 33.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 7130 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN, hitch control is electronic lower link, and listed lift is 9,300 lbs | 4218 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
