The Case IH 7130 specifications include PTO power rated at 170 hp (126.8 kW), transmission options including full power shift or powershift with creeper and a listed weight of 16,280 to 17,540 lbs.
Case IH 7130 key specifications
| PTO power | 170 hp (126.8 kW) |
|---|---|
| Displacement | 504.5 cu in (8.3 L) |
| Transmission | full power shift or powershift with creeper |
| Fuel capacity | 95 gal (359.6 L) |
| Weight | 16,280 to 17,540 lbs |
| Wheelbase | 118.3 inches (300 cm) |
| Rear PTO | independent |
Case IH 7130 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power170 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity95 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,540 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 7130 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 7130 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.488 × 5.315 inches (114 × 135 mm) |
|---|---|
| Rated RPM | 2,200 |
| Compression | 16.5:1 |
| Air cleaner | dual paper elements |
| Pre-heating | ether starting aid |
| Oil capacity | 21 qt (19.9 L) |
| Coolant capacity | 30 qt (28.4 L) |
| Starter volts | 12 |
| Cooling system | viscous fan |
| Oil change | 250 h |
Transmission options
| Gear options | 18 forward and 2 reverse, 24 forward and 3 reverse, or 18 forward and 4 reverse |
|---|---|
| Clutch | hydraulic wet disc |
PTO and hitch
| Drawbar (tested) | 155.35 hp (115.8 kW) |
|---|---|
| PTO (tested) | 179.10 hp (133.6 kW) |
| Rear hitch category | Category III/IIIN |
| Hitch control | electronic lower link |
| Rear lift (at 24"/610mm) | 9,300 lbs (4,218 kg) |
| Rear PTO speed | 1,000 rpm, 1.75-inch shaft |
Hydraulics
| Hydraulic capacity | 50.5 gal (191.1 L) |
|---|---|
| Hydraulic type | closed center pressure flow compensated (PFC) |
| Hydraulic pressure | 2,600 psi (179.3 bar) |
| Valves | 2 to 4 |
| Pump flow | 22 gpm (83.3 L/min) |
| Total flow | 29 gpm (109.8 L/min) |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 110 |
| Batteries | 2 |
| Battery CCA | 950 |
| Battery volts | 12 |
Dimensions and weight
| 2WD Height (cab) | 119.3 inches (303 cm) |
|---|---|
| 2WD front axle clearance | 22.8 inches (57 cm) |
| 4WD front axle clearance | 17.6 inches (44 cm) |
| Drawbar clearance | 16.6 inches (42 cm) |
| Rear axle | 4 × 114 inches (101 × 2,895 mm) |
Tires and tread
| Rear tread | 60 to 127 inches (152 to 322 cm) |
|---|---|
| 2WD Standard tires (ag) | Front: 14L-16.1. Rear: 18.4R42 |
| 4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R42 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
