The John Deere 7185J tractor hydraulic pump flow is 29 GPM, and hydraulic system pressure is 3,046 psi.
Hydraulic pump flow29 GPM
Implement flow32 GPM
Total hydraulic flow32 GPM
Hydraulic pressure3,046 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity32 gal
John Deere 7185J Hydraulic Flow Details
Hydraulic pump flow
29 GPM
Implement hydraulic flow
32 GPM
Total hydraulic flow
32 GPM
Hydraulic system pressure
3,046 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
32 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
29 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
32 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
32 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
3,046 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
32 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7185J Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 7185J is 32 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
Hydraulic pressure on the John Deere 7185J is 3,046 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (32 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 7185J’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 7185J’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
