The Kubota ZD326H mower blade part number found is K5677-34340. The blade set part number found is K5677-34340. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 3 blades.
Blade part #K5677-34340
Blade set part #K5677-34340
Blade sizethickness 0.25 in (6 mm)
Blade count3 blades
Kubota ZD326H Mower Blade Size and Part Numbers
Mower blade part number
K5677-34340
Mower blade set part number
K5677-34340
Blade thickness
0.25 in (6 mm)
Number of blades
3 blades
Blade type
high-lift, mulching, and bagging
Blade Size Comparison Chart
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Kubota ZD326H Blade Notes
Blade note
The Kubota ZD326H blade listing captured here shows single blade part number K5677-34340, blade set part number K5677-34340, and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the Kubota ZD326H, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the Kubota ZD326H is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
Before ordering Kubota ZD326H blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
Kubota ZD326H Mower Blade FAQ
Which blade type should you use on the Kubota ZD326H?
The blade type captured is high-lift, mulching, and bagging. Use that against the captured fitment value K5677-34340. High-lift helps bagging/discharge; mulching blades need the right mulching setup
What should you double-check with the Kubota ZD326H blade part number?
The captured blade part number is K5677-34340. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
