The Kubota M5950 has a 3-point hitch lift capacity of 2,980 lb (1,352 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 16.2 gpm (61.3 L/min), and operating weight 5,673 lb (2,573 kg).
Best rear lift figure2,980 lb (1,352 kg)
Lift at 24 inches2,980 lb (1,352 kg)
Hitch categoryCategory 1
Operating weight5,673 lb (2,573 kg)
Kubota M5950 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,200 lb (1,451 kg)
Lift capacity at 24 inches behind link ends
2,980 lb (1,352 kg)
Hitch category
Category 1
Hydraulic pump flow
16.2 gpm (61.3 L/min)
Operating weight
5,673 lb (2,573 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
16.2 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
5,673 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M5950 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota M5950 is 2,980 lb (1,352 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota M5950, the 2,980 lb (1,352 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
Hydraulic pump flow is listed as 16.2 gpm (61.3 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota M5950, operating weight is 5,673 lb (2,573 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota M5950’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M5950 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M5950?
Rear lift capacity for the Kubota M5950 is shown as 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M5950 is listed at 2,980 lb (1,352 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota M5950?
Yes. The Kubota M5950 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota M5950?
Start with 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Do hydraulic flow and weight matter for the Kubota M5950?
Yes. The Kubota M5950 lists hydraulic pump flow of 16.2 gpm (61.3 L/min) and operating weight of 5,673 lb (2,573 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
