The Kubota M130X has a 3-point hitch lift capacity of 3,200 lb (1,451 kg) at 24 inches behind the link ends. It also lists hitch category Category 2, hydraulic pump flow 16.9 gpm (64 L/min), and operating weight 9,678 lb (4,390 kg).
Best rear lift figure3,200 lb (1,451 kg)
Lift at 24 inches3,200 lb (1,451 kg)
Hitch categoryCategory 2
Operating weight9,678 lb (4,390 kg)
Kubota M130X 3-Point Hitch Lift Capacity
3-point hitch lift capacity
12,787 lb (5,800 kg)
Lift capacity at 24 inches behind link ends
3,200 lb (1,451 kg)
Hitch category
Category 2
Hydraulic pump flow
16.9 gpm (64 L/min)
Operating weight
9,678 lb (4,390 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
16.9 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
9,678 lb
Average
10,000 lb
Low
6,000 lb
High
16,000 lb
Kubota M130X Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota M130X is 3,200 lb (1,451 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota M130X, the 3,200 lb (1,451 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The Kubota M130X’s captured hydraulic pump flow is 16.9 gpm (64 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota M130X operating weight is listed as 9,678 lb (4,390 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota M130X’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M130X 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M130X?
Rear lift capacity for the Kubota M130X is shown as 3,200 lb (1,451 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M130X is listed at 3,200 lb (1,451 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota M130X?
Yes. The Kubota M130X is listed as Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota M130X?
Start with 3,200 lb (1,451 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota M130X?
No. The Kubota M130X may list 3,200 lb (1,451 kg) of rear lift, but the 9,678 lb (4,390 kg) operating weight and 16.9 gpm (64 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
