The Kubota M115A has a 3-point hitch lift capacity of 3,200 lb (1,451 kg) at 24 inches behind the link ends. It also lists hitch category Category 2, hydraulic pump flow 13.2 gpm (50 L/min), and operating weight 11,500 lb (5,216 kg).
Best rear lift figure3,200 lb (1,451 kg)
Lift at 24 inches3,200 lb (1,451 kg)
Hitch categoryCategory 2
Operating weight11,500 lb (5,216 kg)
Kubota M115A 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
3,200 lb (1,451 kg)
Hitch category
Category 2
Hydraulic pump flow
13.2 gpm (50 L/min)
Operating weight
11,500 lb (5,216 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
13.2 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
11,500 lb
Average
10,000 lb
Low
6,000 lb
High
16,000 lb
Kubota M115A Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota M115A is 3,200 lb (1,451 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota M115A, the 3,200 lb (1,451 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The Kubota M115A’s captured hydraulic pump flow is 13.2 gpm (50 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota M115A operating weight is listed as 11,500 lb (5,216 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota M115A’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M115A 3-Point Hitch FAQ
What is the Kubota M115A 3-point hitch lift capacity?
The Kubota M115A is listed with 3,200 lb (1,451 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota M115A 24-inch lift capacity mean?
It means the Kubota M115A is rated to lift 3,200 lb (1,451 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota M115A use any rear implement?
No. Start with the Category 2 hitch category, then check implement weight against the 3,200 lb (1,451 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota M115A lift?
Use the 3,200 lb (1,451 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 2 and operating weight 11,500 lb (5,216 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota M115A?
Yes. The Kubota M115A lists hydraulic pump flow of 13.2 gpm (50 L/min) and operating weight of 11,500 lb (5,216 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
