The Kubota FT300 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota FT300 Coolant Capacity
| Coolant capacity | 2.17 gal (8.2 L) |
|---|---|
| Cooling system capacity | 2.17 gal (8.2 L) |
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine model | D1105 |
| Engine horsepower | 29.6 hp (22.1 kW) |
| Engine displacement | 1.8 L (111.4 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota FT300 Coolant and Engine Notes
| Coolant capacity note | The Kubota FT300’s key coolant figure here is 2.17 gal (8.2 L) for coolant capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | The Kubota FT300 radiator figure is 2.17 gal (8.2 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | For the Kubota FT300, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota FT300 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota FT300, the supporting engine specs are engine model D1105, engine horsepower 29.6 hp (22.1 kW), and displacement 1.8 L (111.4 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota FT300: buy enough coolant for 2.17 gal (8.2 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota FT300 Coolant Capacity FAQ
How much coolant does the Kubota FT300 take?
The main coolant amount captured for the Kubota FT300 is 2.17 gal (8.2 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota FT300?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota FT300, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota FT300 use?
The captured antifreeze mix for the Kubota FT300 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota FT300 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Kubota FT300 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota FT300, the supporting engine data is engine model D1105, horsepower 29.6 hp (22.1 kW), and displacement 1.8 L (111.4 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
