The Kubota M7500 coolant capacity is listed as 4.17 gal (15.8 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M7500 tractor to protect against freezing and corrosion.
Kubota M7500 Coolant Capacity
| Cooling system capacity | 4.17 gal (15.8 L) |
|---|---|
| Radiator capacity | 4.17 gal (15.8 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M7500 tractor to protect against freezing and corrosion |
| Engine horsepower | 81 hp (60.4 kW) |
| Engine displacement | 4 L (244.1 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M7500 Coolant and Engine Notes
| Coolant capacity note | The Kubota M7500’s key coolant figure here is 4.17 gal (15.8 L) for cooling system capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | For the Kubota M7500, the captured radiator capacity is 4.17 gal (15.8 L). If you are doing a full drain, check the full cooling-system capacity too |
| Coolant type note | For the Kubota M7500, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | For the Kubota M7500, the captured mix is Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M7500 tractor to protect against freezing and corrosion. Straight water is not the right long-term answer unless you are only flushing the system |
| Engine context note | Engine context for the Kubota M7500: engine horsepower 81 hp (60.4 kW) and displacement 4 L (244.1 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | The practical service move for the Kubota M7500: buy enough coolant for 4.17 gal (15.8 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota M7500 Coolant Capacity FAQ
What is the Kubota M7500 coolant capacity?
The Kubota M7500 coolant capacity is listed as 4.17 gal (15.8 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota M7500?
No. Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota M7500?
Premixed coolant can be fine if it matches ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and the required mix. The captured mix for the Kubota M7500 is Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the M7500 tractor to protect against freezing and corrosion.
How often should I change coolant in the Kubota M7500?
The captured coolant change interval for the Kubota M7500 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Kubota M7500 coolant capacity?
The captured engine context is horsepower 81 hp (60.4 kW) and displacement 4 L (244.1 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
