The John Deere X320 mower blade part number found is M168223. The blade measurement captured is width 2.5 in (64 mm). The deck uses 3 blades.
John Deere X320 Mower Blade Size and Part Numbers
| Mower blade part number | M168223 |
|---|---|
| Blade width | 2.5 in (64 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, bagging, and Gator |
Blade Size Comparison Chart
Blade width comparison
John Deere X320 Blade Notes
| Blade note | The John Deere X320 blade listing captured here shows single blade part number M168223 and width 2.5 in (64 mm). Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the John Deere X320, the captured deck information is blade count 3 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the John Deere X320, blade type is listed as high-lift, mulching, standard, bagging, and Gator. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the John Deere X320, confirm part number, deck size and blade count before buying |
John Deere X320 Mower Blade FAQ
Does 2.5 in (64 mm) blade width matter on the John Deere X320?
Yes. The blade width captured is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. A different width can change airflow, cut quality and clipping discharge
Which blade type should you use on the John Deere X320?
The blade type captured is high-lift, mulching, standard, bagging, and Gator. Use that against the captured fitment value M168223. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
