The John Deere D160 mower blade part numbers found are AM141035, GX21784, and GY20852. The blade set part number found is M168223. The blade measurement captured is width 2.5 in (64 mm). The deck uses 2 blades.
John Deere D160 Mower Blade Size and Part Numbers
| Mower blade part number | AM141035, GX21784, and GY20852 |
|---|---|
| Mower blade set part number | M168223 |
| Blade width | 2.5 in (64 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade width comparison
John Deere D160 Blade Notes
| Blade note | The John Deere D160 blade listing captured here shows single blade part numbers AM141035, GX21784, and GY20852, blade set part number M168223, and width 2.5 in (64 mm). Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the John Deere D160, the captured deck information is blade count 2 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the John Deere D160, blade type is listed as high-lift, mulching, standard, bagging, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | Before ordering John Deere D160 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere D160 Mower Blade FAQ
Does 2.5 in (64 mm) blade width matter on the John Deere D160?
Yes. The blade width captured is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. A different width can change airflow, cut quality and clipping discharge
What is the difference between the John Deere D160 blade number and blade set number?
The captured single blade number is AM141035, GX21784, and GY20852, while the captured blade set number is M168223. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the John Deere D160?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. Use that against the captured fitment value AM141035, GX21784, and GY20852. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
