The John Deere X310 mower blade part number found is M154202. The blade set part number found is M168223. The deck uses 2 blades.
John Deere X310 Mower Blade Size and Part Numbers
| Mower blade part number | M154202 |
|---|---|
| Mower blade set part number | M168223 |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, and bagging |
John Deere X310 Blade Notes
| Blade note | The John Deere X310 blade listing captured here shows single blade part number M154202 and blade set part number M168223. Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere X310, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere X310 is high-lift, mulching, standard, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the John Deere X310, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
John Deere X310 Mower Blade FAQ
Should you buy one John Deere X310 blade or a full set?
The single blade number captured is M154202, and the set number captured is M168223. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the John Deere X310?
The blade type captured is high-lift, mulching, standard, and bagging. Use that against the captured fitment value M154202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere X310 blade part number enough to buy from?
The captured blade part number is M154202. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
