The John Deere GX335 mower blade part numbers found are GX335 and GX21785. The blade set part numbers found are GX335 and M168223. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 2 blades.
John Deere GX335 Mower Blade Size and Part Numbers
| Mower blade part number | GX335 and GX21785 |
|---|---|
| Mower blade set part number | GX335 and M168223 |
| Blade thickness | 0.25 in (6 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, and bagging |
Blade Size Comparison Chart
Blade thickness comparison
John Deere GX335 Blade Notes
| Blade note | The John Deere GX335 blade listing captured here shows single blade part numbers GX335 and GX21785, blade set part numbers GX335 and M168223, and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere GX335, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere GX335 is high-lift, mulching, standard, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | The blunt rule with the John Deere GX335: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere GX335 Mower Blade FAQ
What is the difference between the John Deere GX335 blade number and blade set number?
The captured single blade number is GX335 and GX21785, while the captured blade set number is GX335 and M168223. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the John Deere GX335?
The blade type captured is high-lift, mulching, standard, and bagging. Use that against the captured fitment value GX335 and GX21785. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere GX335 blade part numbers enough to buy from?
The captured blade part numbers is GX335 and GX21785. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
