The John Deere X310 is 43 in tall, with a 48 in wheelbase.
Height43 in (3 ft 7 in) / 1,092.2 mm
Wheelbase48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance4.5 in / 114.3 mm
John Deere X310 Dimensions
Overall height
43 in (3 ft 7 in) / 1,092.2 mm
Wheelbase
48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance
4.5 in / 114.3 mm
Tractor Size Comparison Chart
Overall height comparison
This model
43 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
48 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
4.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere X310 Extra Dimension Notes
Storage fit note
The John Deere X310 is a realistic candidate for garage-style storage in the right setup. With height 43 in (3 ft 7 in) / 1,092.2 mm, measure the door, not just the room.
Fitment note
The John Deere X310 is listed with height at 43 in (3 ft 7 in) / 1,092.2 mm. Check the tallest and widest points if cab, ROPS, mirrors or attachments are fitted.
Wheelbase note
The John Deere X310 has a captured wheelbase of 48 in (4 ft 0 in) / 1,219.2 mm. Compare this before assuming two tractors are physically similar.
Ground clearance note
The John Deere X310 ground clearance value is 4.5 in / 114.3 mm. Check it if the machine will be crossing ridges, drains or uneven tracks.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Measure the lowest overhead point, not the tallest part of the shed roof.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 48 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
A tight garage is a bad match when the machine is 43 in tall and 48 in wheelbase. The John Deere X310 needs a clear opening and bay closer to 7 ft high for comfortable storage.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere X310’s 43 in height and width not captured width point to about 7 ft high and the tractor width plus side clearance wide, with the tractor length plus attachment room depth.
Do attachments change the storage size?
Yes. If the bay only clears the listed length not captured length, it is too short once attachments stay on. Use about the tractor length plus attachment room bare, then add attachment length.
How much maneuvering room should I allow?
The length not captured length needs bay depth, but the 48 in wheelbase needs lineup room. Treat about 9 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
