For the John Deere X310, coolant capacity is 9.5 gal (36 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity9.5 gal (36 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere X310 Coolant Capacity Specs
Coolant capacity
9.5 gal (36 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, which
Engine model
John Deere X310 tractor features an 18.5 horsepower
Engine horsepower
18.5 hp
Engine displacement
36.8 cu in (0.6 L)
John Deere X310 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X310 Coolant Service Notes
Coolant capacity note
The John Deere X310 cooling system is listed at 9.5 gal (36 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
For a full coolant service on the John Deere X310, plan around 9.5 gal (36 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, which
Coolant type note
The John Deere X310 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere X310 is The recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, which. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere X310, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The engine context for the John Deere X310 is engine model John Deere X310 tractor features an 18.5 horsepower, engine horsepower 18.5 hp, and engine displacement 36.8 cu in (0.6 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere X310 Coolant Capacity FAQ
How much coolant does the John Deere X310 take?
Plan around 9.5 gal (36 L) when servicing coolant on the John Deere X310. Recheck the system when cool because air pockets can lower the level
Does the John Deere X310 use John Deere Cool-Gard coolant?
Coolant type for the John Deere X310 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere X310?
For the John Deere X310, the coolant mix is listed as The recommended coolant for the John Deere X310 tractor is John Deere Cool-Gard II, which. Do not dilute the system with too much plain water
Do I need to recheck coolant level after servicing the John Deere X310?
Yes. Use the 9.5 gal (36 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
When should contaminated coolant be replaced in the John Deere X310?
If the John Deere X310 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
