The John Deere SRX75 mower blade part number found is M82408. The blade set part number found is M168223. The blade measurement captured is thickness 0.204 in (5 mm). The deck uses 2 blades.
John Deere SRX75 Mower Blade Size and Part Numbers
| Mower blade part number | M82408 |
|---|---|
| Mower blade set part number | M168223 |
| Blade thickness | 0.204 in (5 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade thickness comparison
John Deere SRX75 Blade Notes
| Blade note | The John Deere SRX75 blade listing captured here shows single blade part number M82408, blade set part number M168223, and thickness 0.204 in (5 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money |
|---|---|
| Deck note | For the John Deere SRX75, the captured deck information is blade count 2 blades. Match the blades to the fitted deck, not just the tractor model name |
| Blade type note | The John Deere SRX75 blade style captured here is high-lift, mulching, bagging, and 3-in-1. Blade type affects airflow and clipping handling, not just cut width |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the John Deere SRX75, confirm part number, deck size and blade count before buying |
John Deere SRX75 Mower Blade FAQ
What is the difference between the John Deere SRX75 blade number and blade set number?
The captured single blade number is M82408, while the captured blade set number is M168223. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap John Deere SRX75 blade types?
The blade type captured is high-lift, mulching, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use M82408 as the fitment starting point
What should you double-check with the John Deere SRX75 blade part number?
The captured blade part number is M82408. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
