The John Deere 214 mower blade part number found is M144202. The blade set part number found is M168223. The blade measurement captured is width 2 in (51 mm) and thickness 0.188 in (5 mm). The deck uses 3 blades.
John Deere 214 Mower Blade Size and Part Numbers
| Mower blade part number | M144202 |
|---|---|
| Mower blade set part number | M168223 |
| Blade width | 2 in (51 mm) |
| Blade thickness | 0.188 in (5 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade width comparison
Blade thickness comparison
John Deere 214 Blade Notes
| Blade note | The John Deere 214 blade listing captured here shows single blade part number M144202, blade set part number M168223, and width 2 in (51 mm) and thickness 0.188 in (5 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money |
|---|---|
| Deck note | For the John Deere 214, the captured deck information is blade count 3 blades. Match the blades to the fitted deck, not just the tractor model name |
| Blade type note | The John Deere 214 blade style captured here is high-lift, mulching, standard, bagging, and 3-in-1. Blade type affects airflow and clipping handling, not just cut width |
| Fitment note | Before ordering John Deere 214 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere 214 Mower Blade FAQ
Should you buy John Deere 214 blades by length only?
No. The blade width found is 2 in (51 mm). That is a narrower blade profile, so do not assume a wider high-lift blade is automatically better. Use length, width, center hole and OEM part number together where possible
Should you buy one John Deere 214 blade or a full set?
The single blade number captured is M144202, and the set number captured is M168223. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere 214 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use M144202 as the fitment starting point
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
