The John Deere S240 mower blade part numbers found are M127500 and M145476. The blade set part numbers found are M127500 and M145476. The blade measurement captured is thickness 0.204 in (5 mm).
Blade part #M127500 and M145476
Blade set part #M127500 and M145476
Blade sizethickness 0.204 in (5 mm)
John Deere S240 Mower Blade Size and Part Numbers
Mower blade part number
M127500 and M145476
Mower blade set part number
M127500 and M145476
Blade thickness
0.204 in (5 mm)
Blade type
high-lift and mulching
Blade Size Comparison Chart
Blade thickness comparison
This model
0.204 in
Average
0.188 in
Low
0.125 in
High
0.25 in
John Deere S240 Blade Notes
Blade note
The John Deere S240 blade listing captured here shows single blade part numbers M127500 and M145476, blade set part numbers M127500 and M145476, and thickness 0.204 in (5 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Blade type note
The blade type captured for the John Deere S240 is high-lift and mulching. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
Blades are cheap until you buy the wrong set twice. On the John Deere S240, confirm part number, deck size and blade count before buying
John Deere S240 Mower Blade FAQ
Can you swap John Deere S240 blade types?
The blade type captured is high-lift and mulching. You can often choose a different style only if it fits the same deck and spindle setup. Use M127500 and M145476 as the fitment starting point
What should you double-check with the John Deere S240 blade part numbers?
The captured blade part numbers is M127500 and M145476. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
