The John Deere 8235R is 243.9 in long and 118.5 in wide, with a 126.7 in wheelbase.
Length243.9 in (20 ft 3.9 in) / 6,195.1 mm
Width118.5 in (9 ft 10.5 in) / 3,009.9 mm
Wheelbase126.7 in (10 ft 6.7 in) / 3,218.2 mm
Ground clearance29.4 in (2 ft 5.4 in) / 746.8 mm
John Deere 8235R Dimensions
Overall length
243.9 in (20 ft 3.9 in) / 6,195.1 mm
Overall width
118.5 in (9 ft 10.5 in) / 3,009.9 mm
Wheelbase
126.7 in (10 ft 6.7 in) / 3,218.2 mm
Ground clearance
29.4 in (2 ft 5.4 in) / 746.8 mm
Rear tread width
118.5 in (9 ft 10.5 in) / 3,009.9 mm
Tractor Size Comparison Chart
Overall length comparison
This model
243.9 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
118.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
126.7 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
29.4 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8235R Extra Dimension Notes
Size class note
The John Deere 8235R lands as a large farm tractor when the captured dimensions are considered. It is a large farm tractor, so shed height, gate width, trailer space and implement room matter more than they would on a compact machine.
Storage fit note
For the John Deere 8235R, the practical storage answer is a machinery shed or tall farm bay. With length 243.9 in (20 ft 3.9 in) / 6,195.1 mm and width 118.5 in (9 ft 10.5 in) / 3,009.9 mm, measure carefully.
Fitment note
For the John Deere 8235R, length at 243.9 in (20 ft 3.9 in) / 6,195.1 mm and width at 118.5 in (9 ft 10.5 in) / 3,009.9 mm are the measurements that decide whether it is easy or annoying to store.
Wheelbase note
The John Deere 8235R has wheelbase listed at 126.7 in (10 ft 6.7 in) / 3,218.2 mm. It is a compact way to compare its physical chassis size.
Ground clearance note
The John Deere 8235R clearance spec reads 29.4 in (2 ft 5.4 in) / 746.8 mm. This affects how comfortably it can work over rows or uneven ground.
Tread width note
The John Deere 8235R rear wheel tread is 118.5 in (9 ft 10.5 in) / 3,009.9 mm. Treat the front tread as unconfirmed here.
Storage Tips
A farm shed or machinery bay is the sensible storage target for the John Deere 8235R.
Measure the lowest overhead point, not the tallest part of the shed roof.
For this class, use wide-door shed planning and allow room for implements.
Wheelbase is 126.7 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
If the tractor has wider tire settings, duals or spacers, recheck the actual width.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, 118.5 in width and 243.9 in length with margin. Around 14 ft wide and 30 ft deep is the no-drama check.
What size door should I check?
The door should be bigger than the tractor by about 24 in of height margin and 36 in of side margin. That puts the target around 14 ft wide and 30 ft deep.
Do attachments change the storage size?
Yes. If the storage target is 14 ft wide and 30 ft deep, attachments should be checked against that, not against the bare 243.9 in length alone.
How much maneuvering room should I allow?
Because the tractor is 243.9 in long with a 126.7 in wheelbase, avoid turning sharply right at the doorway. A straight approach around 30 ft is safer.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
