The John Deere 8260R is 96 in wide, with a 120.1 in wheelbase.
Width96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase120.1 in (10 ft 0.1 in) / 3,050.5 mm
Ground clearance24.3 in (2 ft 0.3 in) / 617.2 mm
John Deere 8260R Dimensions
Overall width
96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase
120.1 in (10 ft 0.1 in) / 3,050.5 mm
Ground clearance
24.3 in (2 ft 0.3 in) / 617.2 mm
Rear tread width
118.5 in (9 ft 10.5 in) / 3,009.9 mm
Tractor Size Comparison Chart
Overall width comparison
This model
96 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
120.1 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
24.3 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8260R Extra Dimension Notes
Storage fit note
The John Deere 8260R is more realistic for a barn bay, carport or small machinery shed. With width 96 in (8 ft 0 in) / 2,438.4 mm, low domestic garages are not the safest assumption.
Fitment note
The John Deere 8260R dimensions give width at 96 in (8 ft 0 in) / 2,438.4 mm. This is the basic answer for whether it fits in your shed, barn or trailer space.
Wheelbase note
The John Deere 8260R lists 120.1 in (10 ft 0.1 in) / 3,050.5 mm wheelbase, which is useful when judging stability and storage length.
Ground clearance note
For rougher work, the John Deere 8260R’s 24.3 in (2 ft 0.3 in) / 617.2 mm ground clearance is a key number to check.
Storage Tips
A small shed can work if the bay clears the tractor with real margin around the doorway.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Longer wheelbase machines are easier to store when the door approach is straight and uncluttered.
For wider tractors, leave room on both sides instead of using the exact opening width.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 96 in wide, count it as too tight. The safer check for the John Deere 8260R is around 12 ft wide.
What size door should I check?
Use 12 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 96 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 120.1 in wheelbase and 96 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
