The John Deere 8200T is 103.7 in wide, with a 89 in wheelbase.
Width103.7 in (8 ft 7.7 in) / 2,634 mm
Wheelbase89 in (7 ft 5 in) / 2,260.6 mm
Ground clearance17.7 in (1 ft 5.7 in) / 449.6 mm
John Deere 8200T Dimensions
Overall width
103.7 in (8 ft 7.7 in) / 2,634 mm
Wheelbase
89 in (7 ft 5 in) / 2,260.6 mm
Ground clearance
17.7 in (1 ft 5.7 in) / 449.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
103.7 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
89 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
17.7 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8200T Extra Dimension Notes
Storage fit note
The John Deere 8200T is a shed-bay tractor rather than a garage tractor. With width 103.7 in (8 ft 7.7 in) / 2,634 mm, leave margin for height and width.
Fitment note
The John Deere 8200T is listed with width at 103.7 in (8 ft 7.7 in) / 2,634 mm. Check the tallest and widest points if cab, ROPS, mirrors or attachments are fitted.
Wheelbase note
The John Deere 8200T has a captured wheelbase of 89 in (7 ft 5 in) / 2,260.6 mm. Compare this before assuming two tractors are physically similar.
Ground clearance note
The John Deere 8200T ground clearance value is 17.7 in (1 ft 5.7 in) / 449.6 mm. Check it if the machine will be crossing ridges, drains or uneven tracks.
Storage Tips
Leave room around the John Deere 8200T for mirrors, steps, tires, cab/ROPS and attachments.
Recommended storage clearance: target about 168 in (14 ft) clear width.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 89 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
For this very large farm tractor, garage fit is not a yes/no from the model name. Compare the actual length not captured length, 103.7 in width and height not captured height against a clear 14 ft wide space.
What size door should I check?
The tractor is height not captured tall, 103.7 in wide and length not captured long. Check a clear opening around the tractor height plus clearance high, 14 ft wide and the tractor length plus attachment room deep so you are not parking with inches to spare.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 14 ft target, approach angle matters more. The John Deere 8200T’s 103.7 in width and 89 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
