The John Deere 7210 tractor hydraulic pump flow is 59 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow59 GPM
Implement flow16 GPM
Total hydraulic flow31.9 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity17.2 gal
John Deere 7210 Hydraulic Flow Details
Hydraulic pump flow
59 GPM
Implement hydraulic flow
16 GPM
Total hydraulic flow
31.9 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
17.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
59 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
16 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
31.9 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
17.2 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7210 Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 7210’s implement hydraulic flow matters more than total flow. The listed gap is about 15.9 GPM between implement flow and total flow.
Hydraulic pressure note
Hydraulic pressure on the John Deere 7210 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
For hydraulic implements, match the implement to the available hydraulic flow (16 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 7210: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 7210 is 17.2 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
