The Case IH 7210 specifications include PTO power rated at 130 hp (96.9 kW), transmission options including full power shift or creeper and a listed weight of 15,215 to 16,590 lbs.
Case IH 7210 key specifications
PTO power
130 hp (96.9 kW)
Displacement
504.5 cu in (8.3 L)
Transmission
full power shift or creeper
Fuel capacity
78 gal (295.2 L)
Weight
15,215 to 16,590 lbs
Wheelbase
118.3 inches (300 cm)
Rear PTO
independent
Case IH 7210 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power130 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity78 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight16,590 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 7210 power chart
Compare the available engine, PTO and drawbar power ratings.
PTO power130 hp
Tested PTO power132.3 hp
Tested drawbar power116.8 hp
Case IH 7210 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity295.2 L
Hydraulic capacity172.2 L
Engine oil20.8 L
Coolant26.5 L
Engine specifications
Bore/Stroke
4.488 × 5.315 inches (114 × 135 mm)
Rated RPM
2,200
Compression
17.3:1
Fuel system
mechanical injection
Air cleaner
dual paper elements
Pre-heating
block heater (optional)
Oil capacity
22 qt (20.8 L)
Coolant capacity
28 qt (26.5 L)
Starter volts
12
Transmission options
Gear options
18 forward and 4 reverse or 24 forward and 6 reverse
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
