The John Deere 45C is 132 in long, 60 in wide, and 72 in tall, with a 66.3 in wheelbase.
Length132 in (11 ft 0 in) / 3,352.8 mm
Width60 in (5 ft 0 in) / 1,524 mm
Height72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase66.3 in (5 ft 6.3 in) / 1,684 mm
John Deere 45C Dimensions
Overall length
132 in (11 ft 0 in) / 3,352.8 mm
Overall width
60 in (5 ft 0 in) / 1,524 mm
Overall height
72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase
66.3 in (5 ft 6.3 in) / 1,684 mm
Tractor Size Comparison Chart
Overall length comparison
This model
132 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
60 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
72 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
66.3 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 45C Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 45C is not oversized. With length 132 in (11 ft 0 in) / 3,352.8 mm, width 60 in (5 ft 0 in) / 1,524 mm, and height 72 in (6 ft 0 in) / 1,828.8 mm, a good garage, carport or compact shed may be workable.
Fitment note
For the John Deere 45C, the main fitment numbers are length at 132 in (11 ft 0 in) / 3,352.8 mm, width at 60 in (5 ft 0 in) / 1,524 mm, and height at 72 in (6 ft 0 in) / 1,828.8 mm. These are the specs to check against a shed, trailer or gate.
Wheelbase note
The John Deere 45C is listed with a 66.3 in (5 ft 6.3 in) / 1,684 mm wheelbase. That helps frame the rest of the dimension table.
Storage Tips
For the John Deere 45C, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
Wheelbase is 66.3 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
For this compact tractor, garage fit is not a yes/no from the model name. Compare the actual 132 in length, 60 in width and 72 in height against a clear 7 ft high, 8 ft wide, 15 ft deep space.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere 45C’s 72 in height and 60 in width point to about 7 ft high and 8 ft wide, with 15 ft depth.
Do attachments change the storage size?
Yes. If the bay only clears the listed 132 in length, it is too short once attachments stay on. Use about 15 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 132 in length needs bay depth, but the 66.3 in wheelbase needs lineup room. Treat about 13 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
