The Case IH Farmall 45C CVT tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.8 gpm | 37.1 lpm, hydraulic type is open center, and valves/remotes are listed as 1 or 2 Optional.
Hydraulic Flow9.8 gpm | 37.1 lpm
Hydraulic Typeopen center
Valves / Remotes1 or 2 Optional
Lift Capacity2800 lbs | 1270 kg
Case IH Farmall 45C CVT Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
9.8 gpm | 37.1 lpm
Rear remotes
1 or 2 Optional
Case IH Farmall 45C CVT Hitch, Remote & Lift Specs
Rear hitch type
I
Rear hitch control
position control
Rear lift at ends
3541 lbs | 1606 kg
Rear lift at 24 inches
2800 lbs | 1270 kg
Case IH Farmall 45C CVT Useful Hydraulic Calculations
Rear lift per pump gpm
285.7 lb per gpm
Case IH Farmall 45C CVT Hydraulic Comparison Charts
Pump flow comparison
This model
9.8 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
2,800 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 45C CVT Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Case IH Farmall 45C CVT Hydraulic Capacity FAQ
Why is the Case IH Farmall 45C CVT hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 45C CVT, but pump flow is 9.8 gpm | 37.1 lpm, system type is open center, and lift is listed as 2800 lbs | 1270 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 45C CVT hydraulics feel fast or slow?
The useful speed clue is 9.8 gpm | 37.1 lpm pump flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Farmall 45C CVT?
On the Case IH Farmall 45C CVT, 9.8 gpm | 37.1 lpm pump flow points to quicker loader and cylinder movement and 2,800 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 45C CVT?
For implement matching, the useful checks are 9.8 gpm flow, 2,800 lb listed lift, 1 or 2 Optional remote/valve listing, and I hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 45C CVT rear lift capacity strong?
The listed lift figure is 2800 lbs | 1270 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Farmall 45C CVT hydraulic remotes enough?
The Case IH Farmall 45C CVT remote/valve listing is 1 or 2 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Farmall 45C CVT hydraulics handle long hydraulic jobs?
The useful heat clues are 9.8 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall 45C CVT hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position control, and listed lift is 2800 lbs | 1270 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall 45C CVT use?
The hydraulic system is listed as open center with 9.8 gpm | 37.1 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall 45C CVT hydraulics?
For service planning, the system is listed as open center and flow is listed at 9.8 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
