The Case IH Farmall 45C Series II dimensions found are: length is 128.1 inches | 325 cm, width is 69.1 inches | 175 cm, height is 98.4 inches | 249 cm, and wheelbase is 73.2 inches | 185 cm.
Length128.1 inches | 325 cm
Width69.1 inches | 175 cm
Height98.4 inches | 249 cm
Wheelbase73.2 inches | 185 cm
Case IH Farmall 45C Series II Dimensions
Overall length
128.1 inches | 325 cm
Overall width
69.1 inches | 175 cm
Overall height
ROPS: 98.4 inches | 249 cm | Cab: 93.3 inches | 236 cm
Wheelbase
73.2 inches | 185 cm
Case IH Farmall 45C Series II Weight
ROPS Weight
3770 lbs | 1710 kg
Cab Weight
4453 lbs | 2019 kg
Case IH Farmall 45C Series II Tire Size Notes
Lawn/turf front
28×8.50-15
Lawn/turf rear
41×14.00-20
Industrial front
12-16.5
Industrial rear
17.5Lx24
Case IH Farmall 45C Series II Dimension Comparison Charts
Length comparison
This model
128.1 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
69.1 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
98.4 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
73.2 in
Average
86 in
Low
70 in
High
105 in
Weight comparison
This model
3,770 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
61 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 45C Series II Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 45C Series II is about 128.1 inches | 325 cm long, about 69.1 inches | 175 cm wide, and about 98.4 inches | 249 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 45C Series II Dimensions FAQ
Is the Case IH Farmall 45C Series II a long tractor?
The Case IH Farmall 45C Series II has an average listed length at 128.1 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 45C Series II narrow enough for tight storage?
The listed width is middle-of-the-pack at 69.1 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH Farmall 45C Series II tall for a shed or garage?
The listed height is about normal at 98.4 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH Farmall 45C Series II need?
The bare footprint is about 61 sq ft from a 10.7 ft length and 5.8 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH Farmall 45C Series II have a short or long wheelbase?
The wheelbase is short for the category at 73.2 in, which is below the 86 in benchmark average. That points to a more compact chassis length.
Is the Case IH Farmall 45C Series II heavy for its size?
The listed weight is light for the category at 3,770 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the Case IH Farmall 45C Series II fit easily in storage?
The fit numbers are fairly normal for the category: length 128.1 in, width 69.1 in and height 98.4 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
